[NOTICE] 웰진 웹사이트의 만족도를 조사합니다.
TE Buffer (pH 7.6), (ML014-76)

TE Buffer (pH 7.6), (ML014-76)

  오후 1시 이전 주문은 당일 발송됩니다.
  냉장, 냉동 제품은 금요일에는 발송이 불가능하며, 차주 월요일에 발송됩니다.
  재고 소진 시 배송이 지연 될 수 있습니다.(제품마다 생산소요기간 상이)
Special Order for bulk

Contact Us
Product Details

제품 설명서 (PDF 파일 다운로드) MSDS (PDF 파일 다운로드)


Tris-EDTA (TE) Buffer Solutions
DNase, RNase and protease-none detected

Catalog Number ML 014-74 (pH 7.4)
                           ML 014-76 (pH 7.6)
                           ML 014-80 (pH 8.0)

Storage Temperature 15~30°C

Product Description
Tris-EDTA (TE) buffer solution is the most commonly used solution in suspending and preserving nucleic acid. Tris {tris(hydroxymethyl)aminomethane}, which is easily soluble in water, exhibits a pKa of 8.1 (25°C) and buffers at maximum efficiency between pH ranges 7.0~9.1; therefore the product is appropriate for preserving nucleic acid, which requires to be rinsed and suspended in a slightly basic solution (pH 7.4~8.0). When the pH goes below 7.0 or above 9.1, however, the product`s buffering capability diminishes and the pH becomes susceptible to temperature (1°C increase leads to 0.03 drop in pH). For accurate pH measurements, a specialized pH probe for Tris solutions is required. The product is highly reactive and cannot be used with glutaraldehyde, formaldehyde, and glyoxal. Some animal cells also shoe toxic responses to the product; therefore such facts should be considered in advance to using the product. Ethylenediaminetetraacetic acid (EDTA) combines with cations such as Mg2+ or Ca2+ to form a complex compound. EDTA has 4 negative charges for each molecule, and reacts with the diatomic positive charges of two cations. These cations generally assist enzymes (DNase) in hydrolyzing DNA. Potential DNase activity in solutions containing nucleic acid can be deterred with the addition of EDTA. However, EDTA might repress helpful enzyme reactions when rinsing and suspending nucleic acids. Such facts need to be considered prior to the usage of TE buffer. Alternative methods including diluting the solution to a tenth of its original concentration, or using Tris-Cl buffer.

ML 01474 contains 10 mM Tris-HCl and 1 mM EDTA. pH is 7.4.
ML 01476 contains 10 mM Tris-HCl and 1 mM EDTA. pH is 7.6.
ML 01480 contains 10 mM Tris-HCl and 1 mM EDTA. pH is 8.0.

The concentrated TE buffers should be stored at 15~30°C. Deterioration of the solution may be recognized by (1) precipitate or particulate matter throughout the solution, (2) cloudy appearance, (3) color change, and/or (4) pH change. Product label bears expiration date.

For In Vitro Use Only